NRI Currenza H2 Hopper Series, Техническая документация инструкция

Страница: 14 / 47

14
National Rejectors, Inc. GmbH, Buxtehude
D
ESIGN
Fig. 2b: Payout disc
Bowl and front bowl cover
The bowl [2a/10] and bowl cover [2a/3] build the hopper funnel, which
collects the coins, in order to feed the rotating disc (Fig. 2b), that pays out
the coins.
Rotor, payout disc, and safety flap
The payout disc (Fig. 2b) driven by a rotor directs the
coins from the bowl into the coin outlet [2a/9] by means
of metal pins inserted in the disc.
In order to protect the rotating parts against access
during operation and transport the coins optimally, the
bowl is provided with a safety flap [2a/1].
Coin passage
The coin passage [2a/8] lets the coins pass paid out by an additional hopper
and thus serves as second coin outlet (see section "Space-saving dual
hopper assembly (coin passage)" in Chap. 4 "Function").
Mounting bracket
The mounting bracket [2a/6] (Fig. 2c) is used to
install the hopper in the machine (see Chap. 5 "Start-
up").
Interfaces
For detailed information on the parallel or serial ccTalk machine
interface [2a/12] and on the connector for the empty and full
recognition [2a/16] please refer to Chap. 9 "Technical data" (cp. also section
"Hopper control" in Chap. 4 "Function").
Fig. 2c: Mounting brackets