NRG Systems SymphoniePRO, Руководство пользователя

Страница: 48 / 215

SymphoniePRO User Manual
Rev. 8 support@nrgsystems.com | Page 48
11 January 2018
Use SNTP
If Use SNTP is selected, the logger will attempt to connect to the SNTP server found in the Time Server field. If
SNTP-based time synchronization has been selected, the logger will attempt to connect to the configured SNTP
server if it has been more than one day since it last successfully communicated with an SNTP server.
Use GPS
If Use GPS is selected, the logger’s internal clock is updated with UTC time provided by the GPS. If the time
adjustment is larger than 60 seconds, an entry is made in the event log.
If both boxes are checked, a GPS time sync will be attempted first, and SNTP will be used if the GPS time sync
fails.
3.3.4 Email Schedule
Frequency
Email frequency can be set to 10 minutes, 30 minutes, 1 hour, 2 hours, 4 hours, 6 hours, 12 hours, daily, 2 days,
3 days, 4 days, 5 days, 6 days, or weekly. Setting the email frequency to Disabled will prevent the logger from
attempting to email data files, and attempts to initiate an email from the logger’s keypad will be ignored.
Time
The Time field allows the user to select the time of day at which emails will be sent. Time can be edited as
needed and does not need to be at the top of the hour.
If unable to connect successfully on the first attempt, the connection will automatically be attempted again
every 10 minutes up to 5 times.
SMTP Server
SMTP servers are used to send email from the logger. The SMTP server cannot use SSL or TLS encryption.
Packet-mail users will enter an SMTP server name of smtp.packet-mail.net.
SMTP Port
The SMTP Port is typically port 587 or sometimes port 25. Consult your email service provider to confirm the
correct port to use.
User Name
The User Name is the SMTP user name provided for the iPack’s email account, typically something like “Person”
or “
person@companyABC.com .”
Password
The Password is the password associated with this email account.