NPK SCS-1002, Руководство по эксплуатации

Страница: 17 / 80

17 Version 0.2
SCS-1002 Hospital and refrigerator alarm system
Table 7 – Timer settings of signaling delay
Position of DIP-switch Signaling delay, sec Position of DIP-switch Signaling delay, sec
0 120
30 150
60 180
90
– –
2.1.2 Reception and control devices SCS-CU type
Functionality of RCD, SCS-CU type:
a) to control signals from controllers of call buttons in RS-485 network;
b) sound and light address signaling if call signal occurs in the network;
c) sound and light alarm signaling if communication with controllers of call
buttons is lost;
d) to control 32 controllers at the same time;
e) to display status of 32 controllers, their names and communication status on
the LCD;
f) to control RCD and provide its settings;
g) temporary mute of sound call signaling and signaling of communication failure
with a controller;
h) to stop call signaling;
i) to connect external alarm;
j) to provide backlight of controls and LCD with brightness dimming;
k) to control power supply to all connected SCs.
Figure 5 describes exterior of SCS-CU. For the description and assignment of
controls, see table 8.