6
OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
EN
POOL MAINTENANCE
GENERAL
• Do not leave the pool in direct sunlight without the insulation cover. Direct sunlight may damage
the pool’s surface materials. When the pool is not in use, put the cover in place and lock it,
regardless of whether the pool is empty or full.
• Do not roll or slide the pool on its side. This may cause damage to the siding of the pool.
• Do not attempt to open up the control panel of the pool by yourself. The control panel does not
contain any parts that can be serviced by yourself.
•
Empty and clean the pool regularly. Always fi ll the pool with clean water.
•
Clean the fi bre fi ler at minimum once per month.
• Wash yourself carefully before entering the pool.
• Sand that gets carried into the pool may clog the massage pumps
• Replace the water in the pool 2–3 times per year.
FILLING THE POOL
1.
Remove the fi bre fi lter according to the instructions below.
2.
Fill the pool with water through the fi lter system (with a garden hose, for example), so that
airlocks are not formed in the piping or in the pumps.
3.
We recommend fi lling the pool up until the edge of the LED lights. Ensure that there is always
enough water and that the jets are always submerged.
4.
After fi lling the pool, set the fi bre fi lter, the fi lter sift and the cover of the fi lter back to their place.
5. Turn on the power to the pool and ensure that it is in READY mode.
6. Close up the insulation cover of the pool.
EMPTYING THE POOL
1. Turn off power to the pool before emptying it.
2. The pool is emptied into the wastewater drain with a submersible pump. PLEASE NOTE! Do not
use a metal submersible pump.
3.
Remove the fi bre fi lter after emptying the pool according to the instructions below.
4. Clean the inner surface thoroughly with a mild disinfectant. Use a soft and lint-free cloth or
sponge.
5. After cleaning the pool, we recommend waxing the coating. The wax effectively protects the
naturally shiny surface of the pool.
1.
2.
3.