4
OY NORDIC SPA LTD | Tehdaskatu 7, 24100 Salo | www.novitek.fi
EN
INSTALLATION AND STARTUP
The pool should be lifted off the pallet onto its final site turned to its side or turning it horizontally.
Cargo straps can be used as a help, for example. The pool should not be slid across the ground,
therefore make sure to have enough helpers on hand. The pool can be lifted onto its final site with a
loading crane as well.
PLEASE NOTE! Check the condition of the delivery package when the pool arrives at your yard .
If any potential transportation damage is present, a damage report must be filed immediately
with the carrier as well as the retailer .
INSTALLATION SITE
The pool can be installed directly onto the ground, on a terrace, sunken into a terrace, on a balcony –
or indoors as well. The requirements are that the surface is flat, structurally uniform and free of frost
heaving, and withstands the weight of the pool unaltered (2 000 – 3 000 kg). Faulty installation may
lead to structural damage of the product. The manufacturer does not account for potential damage
caused by incorrect installation of the pool.
There must be no less than 50 cm of space around the outdoor spa pool for any required servicing
measures. It must be possible to open the service hatches located on each side of the pool without
impediment.
INSTALLATION DIRECTLY ON THE GROUND
The foundation for the pool must be even, structurally uniform and free of frost heaving. The
foundation can be laid with concrete, paving stones, bricks, gravel or wood. Depending on the model
of the pool, the base must be able to withstand a weight of 2 000 – 3 000 kg, without subsiding or
transforming. The pool comes equipped with an insulating base. Therefore, the foundation does not
require separate insulation. For the base, we recommend using concrete slabs of a minimum thickness
of 10 cm.
INSTALLATION ON A TERRACE
When installing the pool on a terrace, the requirements are the same as when installing directly on the
ground. The base must be uniform and completely even, in addition to this, make sure the terrace is
able to withstand a weight of 2 000 – 3 000 kg, depending on the model of the pool.
INSTALLATION SUNKEN INTO A TERRACE
When installing the pool sunken into a terrace, the requirements are the
same as when installing directly on the ground. If the pool is sunken into
a terrace, separate maintenance hatches must be made to each side of the
pool. The maintenance hatches must be made so that the side panels of
the pool can be opened, and that there is enough space to work around the
pool, when required.
If the pool comes equipped with sink panelling factory-installed, a
separate service hatch does not need to be made. The sinking depth can
be maximum 40 cm from the bottom of the pool to the surface of the
terrace.
INSTALLATION INDOORS
When installing the pool indoors, appropriate drainage as well as wet space regulations required by
law, must be ensured. The floor beneath the pool must be even, and the structure of the house must be
able to withstand a weight of 2 000 – 3 000 kg, depending on the model of the pool. The manufacturer
does not account for potential damage caused by incorrect installation of the pool.
SERVICE HATCH
SER
VICE HA
TCH
SERVICE HATCH
SER
VICE HA
TCH