User Manual
XLP 604
Material type
Settings
Default setting
Step width
Easy Plug
Endless, Punched
Punched
--
#PC1005, #IM
Definition of the used label material. A distinction is made between endless material and gapped ma-
terial (hole gaps, self-adhesive material with register gaps). The detected gap position corresponds to
the start of the label.
•
Endless
: If material is to be used without gaps
•
Punched
: If material is to be used with gaps
The value is overwritten by the appropriate Easy Plug command when sending label formats.
Material length
Settings
Default setting
Step width
Easy Plug
[5...max. label length
[33]
]
100 mm
0.1 mm
#PC1006, #IM
The material length (label length) is the distance between the gaps, measured from the front edge (be-
ginning) of a label to the front edge of the next label.
The value is overwritten by the appropriate Easy Plug command when sending label formats.
Material width
Settings
Default setting
Step width
Easy Plug
6,0...max. width
[34]
100 mm
0.1 mm
#PC1007, #IM
Zero position of the left border. If the printer is working in line-printer mode, alterations can be made in
millimetre units.
Label sens. type
(Label sensor type)
Settings
Default setting
Step width
Easy Plug
Punched, Reflex, Full
size, Reflex (upper)
Punched
--
#PC2015, #IM
•
Punched
: Light transmission sensor for labels with transparent or register gaps (self-adhesive labels)
•
Reflex
: w/o function
•
Full size
: w/o function
•
Reflex (upper)
: w/o function
Ribbon width
33
The max. label length depends on several factors, e. g. the memory configuration.
34
The max. width depends on several factors, e. g. the memory configuration.
Edition 2 - 12/2021
50
Product Description
Parameter menu
