User Manual
XLP 604
Selecting Files from an External Memory Medium
Before you begin
• The file is stored on an external memory medium (e. g. USB thumb drive) in folder
\FORMATS
• The file has one of the extentions
.for
(print job or setup file) or
.tar
(firmware)
• Drive letter
C:
must be assigned to the storage medium (that is,
Print interface
>
Drives
>
Drive C
must be set to that storage medium on which the file with the print job is stored).
Procedure
1.
Switch off the printer.
2.
Connect the memory medium to the printer.
3.
Switch on the printer.
The printer shows the “Ready” screen (cyan)
4.
Press the keys 2+4 to switch to standalone mode.
A file selection dialog for memory media appears:
5.
Select a memory medium and confirm the selection.
A file selection dialog appears, which shows the printjobs stored on the selected memory medium:
6.
Select a print job with key 2 and 3. Press key 4 to load the print job.
Another selection dialog appears. As a standard, the print amount can be changed, which is de-
fined as default in the print job (fig. left). Depending on the print job, there can be more than one
input fields (fig. right).
Edition 2 - 12/2021
92
Operation
Standalone Operation
