PERFORMANCE PARAMETERS stored in part 1's data block only
byte
parameter
189
PERFORMANCE PART EDIT SELECTION (bits 0..3 are 1 for parts 1..4 respectively)
190
PERFORMANCE PART ON SELECTION (bits 0..3 are 1 for parts 1..4 respectively)
191
PERFORMANCE TEMPO BPM (this is the performance's version of parameter 84)
192..207
PERFORMANCE NAME (16 ascii characters)
208
PERFORMANCE VOCODER PART SELECTION (0..3 for parts 1..4)
209..255
(not used, set to 0)
GLOBAL DATA BLOCK (256 bytes)
byte
parameter
0
POWER-UP PERFORMANCE MODE PERFORMANCE BANK (always 1)
1
POWER-UP PERFORMANCE MODE PERFORMANCE NUMBER
2
POWER-UP PROGRAM MODE PROGRAM BANK 1..8
3
POWER-UP PROGRAM MODE PROGRAM NUMBER 0..99 banks 1-4, 0-49 banks 5-8
4
POWER-UP MODE (0=program, 1=performance)
5
MEMORY PROTECT (0=protected 1=not protected)
6
(not used, set to 15)
7
MIDI LOCAL CONTROL (0=off 127=on 63=sequencer mode)
8
GLOBAL MIDI CHANNEL (0..15)
9
MIDI CLOCK SOURCE (0=internal 1=external)
10
MASTER TUNE CENTS ***
11
VELOCITY CURVE (0=soft 1=hard)
12
EXTERNAL INPUT RANGE (0=line 1=mic)
13
EXTERNAL INPUT TRIM (-10..+20 dB)
14
EXTERNAL INPUT TRIGGER SENSITIVITY (0 is most sensitive)
15
GLOBAL SYNC TYPE (0,1,2 = note when all notes off, first note after prog change, midi song start)
16
PARAMETER MOMENTARY DISPLAY TIME (off.200..1200mS)
17
MENU INITIAL PAGE MODE (0=first 1=last used)
18
PROGRAM MODE PARAMETER DISPLAY MODE (0=timed 1=permanent)
19-255
(not used, set to 0)
APPENDIX
MIDI System Exclusive
•
71
•