Novation Circuit Rhythm, Руководство пользователя

Страница: 79 / 95

79
Monitor level
Use Macro 8 to apply digital gain to incoming audio. This will default to 0 dB upon power-on and is
never saved. This value may be increased to +12 dB or reduced to silence.
Sample Trimming
You can use Macro control 2 ( Start ) to trim the start point of the recorded sample and Macro control
3 ( Length ) to trim its duration. When either Macro control is moved, the pads in Row 3 of the grid
illuminate sand to indicate the start and duration of the sample. With all eight pads lit, the sample will
play for its full original duration, from the point at which recording commenced. The start point can
be moved “forward” with the
Start control, and the end point moved “back” with the Length control:
both controls have the effect of shortening the overall sample length. The pads go dark to illustrate
the effect of trimming; note that start point and length can have values which are not integral
numbers of increments: this is indicated by the illumination on the “end” pad dimming. The graphics
below illustrate this:
Sample length and start as recorded Sample start point trimmed by 2-3 increments
Sample length trimmed by 2-3 increments
Sample with start point trimmed by 3-4 increments
and length trimmed by 1-2 increments
As soon as the start or length are adjusted, Save will begin to pulse. Press Save to commit the new
start and length. Once a sample is saved it may be trimmed further, but it is not possible to revert
saved changes.