Novation Circuit Rhythm, Руководство пользователя

Страница: 53 / 95

53
Pattern Octave
You can shift the pitch of the currently viewed Pattern up or down one or more octaves by holding down
Shift
20
and then pressing
J
or
K
15
. You can do this either during playback, or when the sequencer is
stopped. Pattern Octave can be changed in any of the Step Views excluding
Sample View
,
Slice Note View
and
Slice Point Record View
. Only the pitch of the currently selected track is adjusted, that of the others
will remain unaffected.
If the pattern contains notes which are already in the highest octave that Circuit Rhythm can generate,
they will remain unaffected by an upward Pattern Octave shift; the same applies to the lowest notes and
a downward octave shift. If this is the case, the
J
or
K
button will light red to indicate that the command
cannot be executed. There is also an upper limit to sample playback pitch (as described in the section on
Keyboard Note View
– see page 33 ) – you may encounter this prior to reaching the maximum playable
octave, depending on the setting of the Tune parameter (Macro 1).