Novatel GPStation-6 Скачать руководство пользователя | Manualshive

Страница: 8 / 89

background image

8

GPStation-6 User Manual Rev 2

Notices

The following notices apply to GPStation-6.

FCC Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
GPStation-6 has been tested and found to comply with the radiated and conducted emission limits for a Class B
digital device. The Class B limits are designed to provide reasonable protection against harmful interference in a
residential installation.
The equipment listed generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

•

Re-orient or relocate the receiving antenna

•

Increase the separation between the equipment and the receiver

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected

•

Consult the dealer or an experienced radio/TV technician for help

Industry Canada

GPStation-6 Class B digital apparatus comply with Canadian ICES-003.
GPStation-6 appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Marking

The GPStation-6 carries the CE mark.



Changes or modifications to this equipment not expressly approved by NovAtel Inc.

could result in violation of FCC, Industry Canada and CE Marking rules and void

the user’s authority to operate this equipment.



To maintain compliance with the limits of a Class B digital device, you must use properly
shielded interface cables (such as Belden #9539 or equivalent) when using the serial data

ports, and double-shielded cables (such as Belden #9945 or equivalent) when using the

I/O strobe port.

Notices

«
...
6
7
8
9
10
...
»

Содержание GPStation-6


























































































Отзывы:

Нет отзывов

Похожие инструкции для GPStation-6

Бренд: Queclink Страницы: 5

Бренд: Haicom Страницы: 32

MSN Direct Receiver

Бренд: Garmin Страницы: 12

Бренд: SecuLife Страницы: 24

Бренд: Haicom Страницы: 47

Бренд: TeleNav Страницы: 36

Бренд: Memory-map Страницы: 66

Бренд: Vectu Страницы: 25

Бренд: Garmin Страницы: 134

Бренд: Topten Страницы: 17

Бренд: Topshine Страницы: 34

Бренд: Topcon Страницы: 108

Бренд: MSI Страницы: 36

Бренд: Golf Plus Страницы: 24

Бренд: Golf Buddy Страницы: 29

Бренд: Horizon Fitness Страницы: 39

Бренд: Blue Sky Network Страницы: 6

Foretrex 301 - Hiking GPS Receiver

Бренд: Garmin Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды