manualshive.com logo in svg

Novatel GPStation-6, Руководство пользователя

Поделиться
Скачать
Novatel GPStation-6 Скачать руководство пользователя страница 20

Installation

GPStation-6 User Manual Rev 2

 20

1.3.1

Status Indicators

The GPStation-6 enclosure has LED to indicate system status for power and communications. Refer to Table 1 for 
specific functionality.

 Table 1:  Status Indicators (RS232)

1.3.2

10 MHz Oscillator

The GPStation-6 enclosure houses its own high performance ultra-low phase-noise Oven Controlled Crystal 
Oscillator (OCXO), so no external frequency reference is required for GPStation-6 receiver operation. The 
GPStation-6 OCXO generates a 10 MHz reference signal delivered directly to the OEM628 GNSS receiver card 
via internal communication lines within the enclosure.

The same 10 MHz OCXO signal is also output on the OSC port (BNC female) of the GPStation-6 enclosure and 
can be used as a frequency reference for other external equipment. The OSC port for the GPStation-6 enclosure is 
output only; the receiver will not operate properly if a 10 MHz signal is input to this port.

1.3.3

Mounting Bracket

Along with the GPStation-6 enclosure, a mounting kit is provided to for mounting the receivers to a surface. To 
install the mounting bracket provided with the GPStation-6, refer to the instructions provided with the mounting 
kit. Also refer to 

Section 6.3, Mounting Bracket Dimensions on page 81

 for bracket dimension information.

Indicator

Indicator Colour

Status

COM1

Green Flashing

Data is being transmitted from COM1

Red Flashing

Data is being received on COM1

COM2

Green Flashing

Data is being transmitted from COM2

Red Flashing

Data is being received on COM2

COM3 

Green Flashing

Data is being transmitted from COM3

Red Flashing

Data is being received on COM3

PWR

Red Solid

The receiver is powered

The mounting kits are not designed for use in high dynamics/vibration environments.

Содержание GPStation-6


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды