Operation Description
32
WARNING
: Before removing the rear wheel, with rear counterweights, from the tractor, first remove
the counterweight from the tire to avoid an accident or injury.
2.14.2 Front Counterweight Use
In order to adjust the relation between front and rear axle
loads of the tractor, it is necessary to install front counterweights.
The mass of the standard front counterweight frame is
45 kg (90) pounds.
You can select a maximum of 11 cast-iron front counterweight
pieces, each one weighing 22kg. (48.5 lb.), for a maximum front
counterweight load of 242kg. (534 lb.). Figure 2-34 Front Counterweight
2.15
Driver’s Seat Adjustment
The forward and backward position and firmness of the driver’s seat are adjustable. For safety, the seat should not be
adjusted to the point where it is too soft, or when the tractor is moving.
2.15.1 Forward and Backward
Driver’s Seat Adjustment
To adjust the seat, pivot the adjustment handle (1) beneath the
outside right side of the driver’s seat (see diagram). At the same
time, move the seat forward or backward. Release the handle
once the required position is reached
2.15.2
Driver’s Seat Firmness Adjustment
Use the knob (1) behind the driver’s seat back rest to adjust
the firmness of the seat for the height and weight of the driver.
1
Figure 2-36 Driver’s Seat Firmness Adjustment
1. Drivers Seat Knob
Figure 2-35 Forward/Backward Driver’s Seat Adjustment
1. Handle
