Operation Description
20
Hazard Warning Switch
The hazard warning switch should be used in case of a tractor malfunction where
the tractor is stopped in a potentially dangerous area.
―1‖ Position: Flashers on.
―0‖ Position: Flashers off.
Figure 2-19 Warning Flashers Switch
Turn Signal Indicators Switch
―1‖ position: Turns on the left turn indicator.
―0‖ position: Turns off both turn indicators.
―2‖ position: Turns on the right turn indicator.
Figure 2-20 Steering Switch
Rear Windshield Wiper Switch (with optional cab)
―1‖ position: Turns on the rear wiper.
―0‖ position: Turns off the rear wiper.
Figure 2-21 Rear Wiper Switch
Ignition Switch
Put the key into the ignition switch and turn it clockwise to the
following positions:
Turn the key to ACC (accessory) to enable the windshield wipers and other
electrical accessories, depending on options installed on the tractor.
Figure 2-22 Ignition Switch
Turn the key further to ON to turn on the tractor’s electrical system.
Turn the key to H to turn on the engine preheat plug.
Turn the key to ST to start the engine. After the engine is started, release the key immediately. The key
will return to the ON position automatically. Power supply for the entire tractor is on at this time.
Turn key counter-clockwise to OFF. This will shut off all power to the entire tractor.
Horn
The horn is located on the steering wheel. It can be turned on by pressing down on the center cover plate of the
steering wheel.
