Operation Description
44
Individual Ventilation Control
Close the water inlet/outlet switch of the engine heater.
Close the compressor switch on the left side of the control plate.
Adjust the airspeed by using the switch in the middle of the
operator panel for outside vented air.
Figure 2-51 Air Conditioner Vents
Air Conditioner Controls
Close the water inlet/outlet switch of the engine heater.
(see air conditioning operational instructions for location)
Open the compressor switch on the left side of the control
plate to get full cooling.
The compressor will work to blow cool air into the
drivers cab.
Turn the temperature control switch on the right of the control
plate to adjust the temperature. Figure 2-52 Air Conditioner Control Panel
Adjust the fan speed with the switch in the middle of the
control panel.
Heater Controls
Close the compressor switch on the left side of the control plate.
Open the water inlet/outlet engine heater switch to start circulating hot water to the heater. This will
increase the cab temperature.
Adjust the fan speed with the switch in the middle of the control panel.
2.18 Tractor Break-In
Before using the tractor, it should be run for a certain period under the condition of a specified lubrication,
rpm and load. The tractor should be checked, adjusted and maintained. This procedure is called break-in.
WARNING:
Learn how to operate and control the tractor, before starting the running in process.
IMPORTANT ISSUES
: Breaking-in needs to be done before any new or overhauled tractor can be put
into use. Operating a tractor without first performing the running in procedure can shorten the service life of
the machine.
