Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1037-020 Rev 3 11/20
7
D6001DE-L Double Unit Series (Double Egress)
Power Operator
C. Secure Backplates.
1 .
Secure backplates to frame using eleven (11):
1/4-20 x 5/8" machine screws or
1/4 x 1-1/2" self-drilling screws from screw
packs in Boxes 1 and 2 (Figure 7) .
NOTE: It is important to properly secure top
edge of backplate. Use of blocking (supplied
by others) or shims (provided) to fill gap
between backplate and wall above header
is HIGHLY recommended. Material must
comply with local codes. Failure to properly
secure top of backplate could result in
operator being allowed to ‘rock’ during
operation. This could result in damage to
operator and diminish operator function.
(Figure 7)
OR
Figure 7
D. Prepare doors for Track and Arm Shoe.
1 . Locate and prepare track holes in door . (Figure 8)
NOTE: Template provided on page 29.
2 . Drill 3/8" (9 .5mm) through (3 places) for sex bolts .
Blocking
Prepare Frame and Doors
Door Opening
Angle
85°
90°
95°
100°
105°
110°
Dimension G
13-1/4"
(336 .5)
12-5/8"
(320)
12"
(305)
11-1/2"
(292)
11-1/8"
(282 .5)
10-3/4"
(273)
Figure 8
3 . Locate and prepare arm shoe holes in door . (Figure 8)
NOTE: Template provided on page 29.
4 . Drill 3/8" (9 .5mm) through (2 places) for sex bolts .
Model
Dim H
DEL
5-3/8" (137)
DEL1
DEL2
7-3/4" (197)
