Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1037-020 Rev 3 11/20
11
D6001DE-L Double Unit Series (Double Egress)
Power Operator
B. Install Main Arm.
A. Mount Forearm and Shoe.
Install Arms to Left Door
Figure 19
Figure 20
Figure 21
Figure 22
Figure 23
Figure 24
1 . Using previously prepared holes in
door, install two (2) 1/4-20 x 1-5/8"
screws through shoe and into sex
bolts . (Figure 19)
NOTE: Orient shoe with long side of
shoe toward hinge. (Figure 20)
View from ceiling looking downward
1 . Open left door .
2 . Slide forearm into main arm
adjusting tube . (Figure 21)
3 . Place square of main arm onto closer
pinion . (Figure 21)
NOTE: Pinion flat should be aligned
as shown. (Figure 22)
4 . Attach main arm to pinion with
screw then tighten with 7/16"
wrench . (Figure 21)
5 . With door closed, rotate main arm
away from hinge until forearm is
perpendicular (90 degrees) with
door . (Figure 23)
6 . While holding arm in position,
secure forearm to adjusting tube
with forearm screw . (Figure 24)
View from ceiling looking downward
Long Side
of Shoe
Hinge
Forearm
Main Arm
90º
Pinion
Screw
Main Arm
Adjusting Tube
Forearm