Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1037-020 Rev 3 11/20
26
D6001DE-L Double Unit Series (Double Egress)
Power Operator
585 Presence Detector Wiring on Double Door Opening
• For Master/Follow or Master-Coord/Follow only
(Sync Cable must be used to connect inverters .)
• Door is normally closed .
• Activating switch will open door .
• Door will close after hold open time delay has
elapsed .
• If door is closed and 585 Presence Detector
senses something in opening, door will not
open .
• If door is at open position and 585 Presence
Detector senses something in opening, door will
not close .
NOTE: Presence Detector and/or sensors CANNOT
be used to active opening cycle of door.
To activate presence detector functionality:
• On inverter, use up/down arrows to scroll to
Page 1 .
• Use left/right arrows to change to Page 2 .
• Use up/down arrows to scroll to PDET Option .
• Use left/right arrows to change value from OFF
to ON .
• Use instructions provided with 585 sensor to
program and make any necessary adjustments
to sensor .
585 Presence Detectors
mounted to / above frame
(on double opening)
20"
(50.8cm)
Min.
20"
(50.8cm)
Min.
Master Unit
Follower Unit
7 IN +
6 IN -
5 NC
4 NO
3 COM
2 PWR
1 PWR
------BLUE
------BROWN
------GREEN
------WHITE
------BLACK
------RED
585 Presence
Detector
585 Sensor Plug
(marked J510)
Cable supplied
with 585 Sensor
7 IN +
6 IN -
5 NC
4 NO
3 COM
2 PWR
1 PWR
------
BLUE
------
BROWN
------
GREEN
------
WHITE
------
BLACK
------
RED
585 Presence
Detector
Cable supplied
with 585 Sensor
585 Sensor Plug
(marked J510)
