Northern Micro Spirit X299-AS, Руководство пользователя

Страница: 16 / 116

Final Power Connection Procedures
After all connections are made, close the system case cover.
1.
Make sure that all switches are in the off position as marked by O.
2.
Connect the power supply cord into the power supply located on the back of your
system case as instructed by your system user’s manual.
3.
Connect the power cord onto a power outlet that is equipped by a surge protector .
4.
You may then turn on your devices in the following order:
5.
Monitor
▪
External devices
▪
System power
▪
The power LED on the front panel of the system case will light, as will the monitor LED.
The system will then run power-on tests. While the tests are running, additional
messages will appear on the screen. If you do not see anything within 30 seconds from
the time you turn on the power, the system may have failed a power-on test. Recheck
your settings and connections or call Northern Micro for assistance.
6.
During power-on, hold down the DEL
key to enter
BIOS setup.
7.