Nortel Passport 4460, Справочник по аппаратуре

Страница: 105 / 152

Chapter 7 Port Connections for the Passport 4460 105
Reference for Passport 4460 Hardware
Connecting the 10/100BASE-T (Ethernet) Port
The 10/100BASE-T (Ethernet*) port is used to connect to a local area network
(LAN). This port, located on the back of the Passport 4460 unit, connects the unit
to the Ethernet.
The following illustration shows the location of the LAN port and its connection
through the Ethernet.
The following illustration displays the pin assignments for the 10/100BASE-T
connector.
After the system is operating, refer to the software documentation for
configuration information (see
“Product documentation” on page 17 ).
Network
Interface Card
LAN Port
EXPANSION
2
P
O
R
T
2 P
O
R
T
3
PORT 1 P1 STATUS P3 STATUS P2 STATUS RST
STAT
10/100 SYSTEM
STATUS
RJ-45 Pin Assignments
1
8
7
6
5
4
3
2
(Tx+) Transmit Data Positive
Pins 4, 5, 7, 8 Not Connected
(Rx-) Transmit Data Negative
(Rx+) Receive Data Positive
(Tx-) Transmit Data Negative
Pin 1