Nortel CC MIS Скачать руководство пользователя

Страница: 297 / 374

CC MIS Maintenance Guide

B-57

System Log Messages

CC MIS

Release 5.2

Unable to get operation result from CfgMgr

Unsuccessful in receiving a response from the Configuration Manager. (Action Code: B)

Error getting partition runstate.

An error occurred trying to determine the state of a partition. (Action Code: B)

Error starting partition(s).

An error occurred trying to start the partition. (Action Code: B)

Error stopping partition(s).

An error occurred trying to stop the partition. (Action Code: B)

Operation successful.

Operation requested was performed successfully. (Action Code: J)

Operation failed.

Operation requested failed. (Action Code: B)

Changes disabled on a partition basis.

Changes are disabled for a particular partition. (Action Code: J)

Partitions in SETUP mode may not be started.

Trying to start a partition in SETUP mode failed. (Action Code: AI)

A SIMULATOR type link is required for this operation.

Operation requires a simulator link. (Action Code: AI)

A LIVE type link is required for this operation.

Operation requires a live link. (Action Code: AI)

Database access failure occurred.

Error accessing database. (Action Code: B)

An internal system error occurred.

Internal system error. (Action Code: B)

Partition ID out of valid range.

An operation was requested for a partition ID that is out of range. (Action Code: B)

No disk selected for this partition’s data.

The partition has no disk defined. (Action Code: AI)

Database not properly initialized.

The database is not properly initialized. (Action Code: B)

Содержание CC MIS























































































































































































































































































































































































Результаты поиска

Содержание CC MIS

Отзывы:

Похожие инструкции для CC MIS

Бренды по названию

Популярные бренды

Nortel CC MIS, Руководство пользователя

Результаты поиска

Содержание CC MIS

Отзывы:

Похожие инструкции для CC MIS

Бренды по названию

Популярные бренды