manualshive.com logo in svg

Nortel CC MIS, Руководство пользователя, Страница: 233 / 374

Поделиться
Скачать
Nortel CC MIS Скачать руководство пользователя страница 233

CC MIS Maintenance Guide                                                                                                                                   14-1

CC MIS 

CC MIS 

Release 5.2

Preventive maintenance

The CC MIS system is a low maintenance unit. However, it is recom-
mended that the following items be checked or performed to keep the
system running properly:

•

Filter on the back of the unit (only on VME 8420)

•

Tape rotation

•

DAT head cleaning

Check filter 

Check the filter on the back of the VME 8420 for an accumulation of
dust and lint. Failure to keep the filter clean can result in VME shut-
downs. (The filter can become clogged and can cause the VME to
shutdown due to over temperature.)

The filter is located in the rear of the VME (as illustrated in the figure 
below). The filter should be checked during scheduled maintenance or
cleaned as needed. The filter “snaps" off for cleaning.

14

Section 14: Preventive 

maintenance 

Suggested preventive mainte-
nance for VMEs

Cleaning the DAT drive

Checking the filter

Rotating the backup tapes

 

Содержание CC MIS























































































































































































































































































































































































Отзывы:

Нет отзывов