manualshive.com logo in svg

Nortel CC MIS, Руководство пользователя, Страница: 133 / 374

Поделиться
Скачать
Nortel CC MIS Скачать руководство пользователя страница 133

CC MIS Maintenance Guide                                                                                                                                  7-31

CC MIS 

CC MIS 

Release 5.2

Supervisor Privileges

Supervisors on a partition can make configuration changes to multiple
local partitions. 

The master supervisor privilege definition is used to disable supervi-
sor privileges on a partition. (The definition’s default setting is to en-
able all privileges.) If a supervisor privilege is disabled in the master
privilege definition for the partition, then that privilege will be dis-
abled for all supervisors in that partition. However,  individual super-
visors can be assigned an override where by their privileges are not
restricted by the master privilege definition. 

The master privilege definition is comprised of several screens. The
first screen is a menu which is accessed from the Configuration Op-
tions menu in the Partition Configuration screen. This screen lists se-
lections to set privileges in any of the five privilege areas that make up
the master privilege definition and a selection to set supervisor over-
rides. 

Guidelines

Perform the steps below to access the Master Privilege Definition
screen.

Note: Partitions must be running to access the Master Privilege
screens. 

Selection of an option causes a secondary screen to be displayed. This
screen is used set the appropriate privileges or supervisor overrides.
The Master Privilege Definition menu screen is shown in the figure
below.

1. Access the Maintenance and Administration menu.

2. Enter c to access the Configuration main menu.

    The system displays the Configuration main menu.

3. Press the Configuration Options function key to display Configuration
    Options menu.

4. Select Partition Configuration to access the Partition Configuration
    screen. Highlight the desired partition.

5. Select Master Privilege Definition from the Configuration Options menu.

The system displays the Partition Options screen.

Step 7-16:  Accessing the Master Privi-

lege screen

Note: if default colors is 
set to Yes in the Admin 
Privileges, then it is always set 
to Yes and cannot be set to No.

Содержание CC MIS























































































































































































































































































































































































Отзывы:

Нет отзывов