manualshive.com logo in svg

Nortel CC MIS, Руководство пользователя, Страница: 234 / 374

Поделиться
Скачать
Nortel CC MIS Скачать руководство пользователя страница 234

14-2                                                                                                                                                                                    297-2671-545

CC MIS 

Release 5.2

Figure 4.1  Location of filter

Tape rotation

It is recommended that backup tapes be rotated daily. This requires
that you have a minimum of two tapes. The backup tape should be 
rotated daily with an alternate tape to help reduce the chance of 
complete data loss due to tape failures.

DAT head cleaning

It is recommended that the DAT heads be cleaned periodically using
the DAT head cleaning tape. The cleaning tape is shipped with the sys-
tem. To use, remove the DAT tape from the tape drive and insert the
cleaning tape. Follow the instructions that accompany the cleaning
tape.

                  Damage to tape drive
Do not unload the backup tape from the drive dur-
ing a backup. Unloading the tape may cause dam-
age to the tape drive.
 

                  Damage to tape drive
Do not unload the backup DAT from the DAT drive
during a backup. Unloading the DAT tape may
cause damage to the DAT drive.
 

Содержание CC MIS























































































































































































































































































































































































Отзывы:

Нет отзывов