Nortel Alteon OS, Справочник по командам

Страница: 262 / 382

Alteon OS Command Reference
262
„
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/l3/rmap
<route map number>
Routing Map Configuration
N
OTE
–
The map number (1-32) represents the routing map you wish to configure.
Routing maps control and modify routing information.
[IP Route Map 1 Menu]
alist - Access List number
aspath - AS Filter Menu
ap - Set as-path prepend of the matched route
lp - Set local-preference of the matched route
metric - Set metric of the matched route
type - Set OSPF metric-type of the matched route
prec - Set the precedence of this route map
weight - Set weight of the matched route
enable - Enable route map
disable - Disable route map
delete - Delete route map
cur - Display current route map configuration
Table 6-67 Routing Map Menu Options (/cfg/l3/rmap)
Command Syntax and Usage
alist
<number 1-8>
Displays the Access List menu. For more information, see page 264 .
aspath
<number 1-8>
Displays the Autonomous System (AS) Filter menu. For more information, see page 265 .
ap
<AS number> [<AS number>] [<AS number>]
| none
Sets the AS path preference of the matched route. One to three path preferences can be configured.
lp
<(0-4294967294)>
| none
Sets the local preference of the matched route, which affects both inbound and outbound direc-
tions. The path with the higher preference is preferred.
metric <(1-4294967294)> | none
Sets the metric of the matched route.
type
<value (
1
|
2)>
| none
Assigns the type of OSPF metric. The default is type 1.
„
Type 1—External routes are calculated using both internal and external metrics.
„
Type 2—External routes are calculated using only the external metrics. Type 1 routes have
more cost than Type 2.
„
none
—Removes the OSPF metric.