Nortel Alteon OS, Справочник по командам

Страница: 370 / 382

Alteon OS Command Reference
370
„
Appendix B: Alteon OS SNMP Agent 40M2420, April 2007
Loading a saved switch configuration
To load a saved switch configuration with the name “MyRunningConfig.cfg” into the switch,
follow the steps below. This example assumes you have a TFTP server at 192.168.10.10.
1. Set the FTP/TFTP server address where the switch Configuration File resides:
Set agTftpServer.0 “192.168.10.10”
2. Set the name of the configuration file:
Set agTftpCfgFileName.0 “MyRunningConfig.cfg”
3. Initiate the transfer. To restore a running configuration, enter 3:
Set agTftpAction.0 “3”
4. If you are using an FTP server, enter a username:
Set agTftpUserName.0 “MyName”
5. If you are using an FTP server, enter a password:
Set agTftpPassword.0 “MyPassword”
Saving the switch configuration
To save the switch configuration to a FTP/TFTP server follow the steps below. This example
assumes you have a FTP/TFTP server at 192.168.10.10.
1. Set the FTP/TFTP server address where the configuration file is saved:
Set agTftpServer.0 “192.168.10.10”
2. Set the name of the configuration file:
Set agTftpCfgFileName.0 “MyRunningConfig.cfg”
3. Initiate the transfer. To save a running configuration file, enter 4:
Set agTftpAction.0 “4”
4. If you are using an FTP server, enter a username:
Set agTftpUserName.0 “MyName”
5. If you are using an FTP server, enter a password:
Set agTftpPassword.0 “MyPassword”