Nortel Alteon OS, Справочник по командам

Страница: 203 / 382

Alteon OS Command Reference
Chapter 6: The Configuration Menu
„
203 40M2420, April 2007
/cfg/sys/access/mgmt
Management Networks Configuration
This menu is used to define IP address ranges which are allowed to access the switch for man-
agement purposes.
[Management Networks Menu]
add - Add mgmt network definition
rem - Remove mgmt network definition
cur - Display current mgmt network definitions
clear - Clear current mgmt network definitions
Table 6-20 Management Network Menu Options (/cfg/sys/access/mgmt)
Command Syntax and Usage
add
<mgmt network address> <mgmt network mask>
Adds a defined network through which switch access is allowed through Telnet, SNMP, RIP, or the
Alteon OS browser-based interface. A range of IP addresses is produced when used with a network
mask address. Specify an IP address and mask address in dotted-decimal notation.
Note : If you configure the management network without including the switch interfaces, it will
cause the Firewall Load Balancing health checks to fail and will create a “Network Down” state on
the network.
rem
<mgmt network address> <mgmt network mask>
Removes a defined network, which consists of a management network address and a management
network mask address.
cur
Displays the current configuration.
clear
Clears the current management network definitions.