Nortel Alteon OS, Справочник по командам

Страница: 51 / 382

Alteon OS Command Reference
Chapter 3: Menu Basics
„
51 40M2420, April 2007
revert Remove pending configuration changes between “apply” commands. Use
this command to remove any configuration changes made since last
apply
.
revert apply
Remove pending or applied configuration changes between “
save
” com-
mands. Use this command to remove any configuration changes made since
last
save
.
exit or quit
Exit from the command line interface and log out.
ping
Use this command to verify station-to-station connectivity across the net-
work. The format is as follows:
ping
<host name>
|
<IP address> [ tries (1-32)> [msec delay ]]
Where IP address is the hostname or IP address of the device, tries (optional)
is the number of attempts (1-32), msec delay (optional) is the number of mil-
liseconds between attempts. Configure the DNS parameters if specifying
hostnames (see
“Domain Name System Configuration” on page 295 ).
traceroute
Use this command to identify the route used for station-to-station connectiv-
ity across the network. The format is as follows:
traceroute
<host name>| <IP address> [< max-hops (1-32)>
[ msec delay ]]
Where IP address is the hostname or IP address of the target station, max-
hops (optional) is the maximum distance to trace (1-16 devices), and delay
(optional) is the number of milliseconds for wait for the response. As with
ping
, the DNS parameters must be configured if specifying hostnames.
pwd Display the command path used to reach the current menu.
verbose
n Sets the level of information displayed on the screen:
0
=Quiet: Nothing appears except errors—not even prompts.
1
=Normal: Prompts and requested output are shown, but no menus.
2
=Verbose: Everything is shown.
When used without a value, the current setting is displayed.
telnet This command is used to telnet out of the switch. The format is as follows:
telnet
<host name>| <IP address> [port]
history
This command displays the most recent commands.
pushd Save the current menu path, so you can jump back to it using popd .
popd
Go to the menu path and position previously saved by using
pushd
.
who
Displays a list of users that are logged on to the switch.
chpass_p
Configures the password for the primary server.
Table 3-1 Description of Global Commands
Command Action