Nortel Alteon OS, Справочник по командам

Страница: 89 / 382

Alteon OS Command Reference
Chapter 4: The Information Menu
„
89 40M2420, April 2007
„
Maximum age value
„
Forwarding delay
You can view port-specific CIST information, including the following:
„
Port number and priority
„
Cost
„
Link type and Port type
The following table describes the CIST parameters.
Table 4-18 CIST Parameter Descriptions
Parameter Description
CIST Root The CIST Root shows information about the root bridge for the Common
Internal Spanning Tree (CIST). Values on this row of information refer to the
CIST root.
CIST Regional Root The CIST Regional Root shows information about the root bridge for this
MSTP region. Values on this row of information refer to the regional root.
Priority
(bridge) The bridge priority parameter controls which bridge on the network will
become the STP root bridge.
Hello
The hello time parameter specifies, in seconds, how often the root bridge
transmits a configuration bridge protocol data unit (BPDU). Any bridge that
is not the root bridge uses the root bridge hello value.
MaxAge
The maximum age parameter specifies, in seconds, the maximum time the
bridge waits without receiving a configuration bridge protocol data unit
before it reconfigure the STP network.
FwdDel
The forward delay parameter specifies, in seconds, the amount of time that a
bridge port has to wait before it changes from learning state to forwarding
state.
priority
(port) The port priority parameter helps determine which bridge port becomes the
designated port. In a network topology that has multiple bridge ports con-
nected to a single segment, the port with the lowest port priority becomes the
designated port for the segment.
Cost The port path cost parameter is used to help determine the designated port for
a segment. Generally speaking, the faster the port, the lower the path cost. A
setting of 0 indicates that the cost will be set to the appropriate default after
the link speed has been auto negotiated.