Nortel 6220, Руководство пользователя, Страница: 96 / 178

97
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
Procedure 3-4
Testing the connection between APU & CSU (APU mode) and CSU
The Configurators Wireless Link Test screen is used to diagnose the
wireless link quality between your APU and any CSU associated with
the APU.
The Wireless Link Test displays the diagnostic counters that apply to the
radio interface and a single remote station connected to this APU.
To assess the overall wireless performance in the wireless area served by
the APU, you might need to run Remote Link Tests with multiple CSUs
(one by one).
Action
Step Action
1.
Prepare a Laptop computer and configure the test network as shown
in Figure 4-35.
2. Prepare a CSU module, POE Injector and Power supply system like a
Power booster in a vehicle or regular power outlet in the home.
Note:
Ensure that the CSU and the Laptop computer are set to DHCP
Client so that they can get the IP address dynamically through the APU
from the Server.
3.
The CSU has the same system parameters as the CSU (APU mode).
Set the system parameter as follows to test connection.
Table 4-3
System Main Parameters
Parameter APU CSU
IP address DHCP Client DHCP Client
Read Write Password User-specific User-specific
SNMP Secure
Configuration Password
User-specific User-specific
Mode Selection APU Secure Data Mode CSU Secure Data Mode
Base Station Mode Polling(Primary) N/A
Frequency User-specific User-specific
Transmit Rate User-specific User-specific
Network ID User-specific User-specific
Others User-specific User-specific