Nortel 6220, Руководство пользователя, Страница: 84 / 178

85
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
Procedure 3-3
Basic configuration and Operation Test (CSU-CSU Mode)
Action
Step Action
1.
The CSU(CSU mode) has the following factory default parameters:
Factory Default
„
IP address: DHCP Client (IEEE 802.11 2)
„
Read Write Password: public
„
SNMP Secure Configuration Password: public
„
IEEE 802.11 Interface Setup
- Mode Selection: CSU SDM(Secure Data Mode)
- Base station mode: N/A
- Frequency
Æ
802.11b/g Unit: CH1 (2412 MHz)
Æ
802.11a Unit: CH149 (5745 MHz)
- Network ID: 0
- Transmit Rate
Æ
802.11a/g Unit: 54Mbps
Æ
802.11b Unit: 11Mbps
2. The CSU (CSU mode) shall have the common system parameters
with that of a factory default parameter of APU to install.
Table 4-2
System Main Parameters
Parameter CSU(APU mode) CSU(CSU mode)
IP address DHCP Client DHCP Client
Read Write Password Public Public
SNMP Secure
Configuration Password
Public Public
Mode Selection APU Secure Data Mode CSU Secure Data Mode
Base Station Mode Polling(Primary) N/A
Frequency User specific User specific
Transmit Rate User specific User specific
Network ID 0 0
Others User-specific User-specific