manualshive.com logo in svg

Nortel 5399, Руководство пользователя, Страница: 98 / 120

Поделиться
Скачать
Nortel 5399 Скачать руководство пользователя страница 98

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Chapter 2    Simple Network Management Protocol (SNMP)

A-94

Book A

Table B-36.  Active Call Statistics (continued)

Call Status Statistics

The 5399 RAC provides the status for current calls. The call status MIB
objects and descriptions are listed in Table B-37.

Table B-37. Calll Status Statistics

Call History Statistics

The 5399 RAC maintains call history statistics for both completed calls
and calls that failed to connect. The number of calls in the call history
table may be configured by the user (default value is zero). Please note
that the larger the number, the more memory resources will be used by
the network management module within the RAC. The call history MIB
object names and descriptions are listed in Table B-38.

MIB Object Name

Description

actcallOctetsRX

Number of packets the call transmitted.

actcallOrigin

The call origin:
incoming (1)
outgoing (2)

actcallCallState

The current state of this channel.

MIB Object Name

Description

anxt1CasBusySignalBits

An enumerated integer that gives the type
of busy signal.

anxt1CasPhoneNumber

The telephone number of the 5399 RAC as
required by certain protocols such as R2.

anxt1ChanIndex

Index value which uniquely identifies the
DS1 interface for this entry.

anxt1ChanNumber

Unique number from 1 to anxt1TotChan
that identifies each internal DS0 channel.

Содержание 5399

























































































































Отзывы:

Нет отзывов