manualshive.com logo in svg

Nortel 5399, Руководство пользователя, Страница: 22 / 120

Поделиться
Скачать
Nortel 5399 Скачать руководство пользователя страница 22

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Chapter 1    Network Administration

A-18

Book A

Table B-5. Field Definitions for the netstat –ip Command (continued)

Field

Definition

Possible local states for PAP security:

Initial

No PAP security has been initiated.

AREQ received

The 5399 RAC has received the Authenticate-Request
message and currently is processing it.

ANAK sent

The 5399 RAC has rejected the peer’s
Authenticate-Request; the link will be coming down.

AACK sent

The 5399 RAC has authenticated the peer.

Possible remote states for PAP security:

Initial

No PAP security has been initiated.

AREQ sent

The 5399 RAC has sent the Authenticate-Request
message and is waiting for the response.

ANAK received

The 5399’s Authenticate-Request has been rejected
by the peer; the link will be coming down.

AACK received

The peer has authenticated the 5399 RAC.

Possible states for CHAP security:

CHAP AACK Rcvd

CHAP Authentication Acknowledged Received.

CHAP AACK Sent

CHAP Authentication Acknowledged Sent.

CHAP CHAL Rcvd

CHAP Challenge Received.

CHAP CHAL Sent

CHAP Challenge Sent.

CHAP RESP Rcvd

CHAP Response Received.

CHAP RESP Sent

CHAP Response Sent.

Содержание 5399

























































































































Отзывы:

Нет отзывов