manualshive.com logo in svg

Nortel 5399, Руководство пользователя, Страница: 91 / 120

Поделиться
Скачать
Nortel 5399 Скачать руководство пользователя страница 91

A-87

Chapter 2    Simple Network Management Protocol (SNMP)

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Book A

Modem Statistics

The 5399 RAC collects modem statistics at the beginning and end of the
call and maintains the statistics per modem on a per call basis. Modem
statistics are available anytime during a call.

When requesting modem statistics, the RAC software reads the most
current statistics from the DSP modem.For this reason, it is important to
determine the state of the modem. For example, the RAC 5399 will save
signal quality at the beginning and end of each call. Once the call is
terminated and a new call is initiated, the previous call’s modem statistics
are available from the call history table.

Table B-35 provides the MIB object names and descriptions.

Table B-35. Modem Statistic Objects

(continued on next page)

MIB Object Name

Description

mdmCtlResetAll

Performs a hardware reset on all internal
modems.

mdmCtlReadConfig

This reads the modem config file. If the
modem is handling an active call, its
configuration will not change until the call
has ended and a new call has been assigned
to that modem.

mdmCtlReset

Performs a hardware reset in the modem.

mdmCtlState

This command puts a modem back into
service (if busied out) or puts the modem
out of service (if available).

Содержание 5399

























































































































Отзывы:

Нет отзывов