Norstar 7316, Системное руководство

Страница: 93 / 294

Using Speed Dial / 93
N0000626 03 Modular ICS 7.0 System Coordinator Guide
Displays
Continue entering the number you want to
program. You can change the number by
pressing
BKSP
or
√
. When you are
finished, press
≥
or
OK
.
Enter the telephone number you want to
program exactly as if you were dialing it
normally. When you are finished, press
≥
or
OK
.
You have entered a code outside the code
range (001-255 for system, 256-279 for user
codes).
There is no number stored on the speed dial
code you have dialed.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number exactly as if you were
dialing it normally. When you are finished,
press
≥
.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number you want to program
exactly as if you were dialing it normally.
When you are finished, press
OK
.
There is no line associated with the speed
dial number you are trying to use. Select a
free external line or line pool and enter the
speed dial feature code again.
The system cannot dial the number stored.
Reprogram the number.
For other displays, see
Common feature displays
on page 249.
01:9___
CANCL BKSP OK
Enter digits
QUIT OK
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT OK
Select a line
Unknown number