NORSELIGHT 4036538577789, Инструкция по установке и эксплуатации

Страница: 16 / 39

16
3.0 Directions for use
Parameter setting for xbo HTP OFR (only for: EX-100 D/1 with factory settings)
Lamp P
max
(operating range: 1000 and 2000W): max: power of the lamp.
When entered, an automatic control will avoid exceeding this value. Factory setting: is on 1000W.
Lamp l
max
(operating range: 55A - 85A): max. admitted current of the lamp.
When entered, an automatic control will avoid exceeding this value. Factory setting: 55A.
Lamp l
max
(operating range: 40 - 50A): min. admitted current of the lamp.
When entered, an automatic control will avoid exceeding this value. Factory setting: 40A.
Lamp stand-by (operating range l
max
- l
min
): lamp stand-by current when contacts 11 and 12 of
J/P2 have been closed. When the contacts are closed, an automatic control will be change the
current according to the admitted operating range. Factory setting: 40A.
Lamp set-point (operating range: l
max
- l
min
: value of the current delivered in output.
Factory setting: 40A.
Remarks:
1) When entering an l
max
value lower than l
min
, l
min
will be set to l
max
. Enter a new l
min
value.
2) When entering a l
max
exceeding l
max
value, l
min
will correspond to l
max
.
EX-100 D/1
Lamp P
max
2000W 1000W
Lamp I
max
85A 55A
Lamp I
min
50A 40A
Lamp stand-by 50A 40A
Lamp set-point 70A 50A