NORSELIGHT 4036538577789, Инструкция по установке и эксплуатации

Страница: 14 / 39

14
For 1600-2000W
N3-80E
These high quality recti fi er power supplies have been expressly designed to ensure the correct
operation and long life of short arc Xenon lamps.
These units, developed to meet the recommendations of Xenon lamp manufacturers, are
fi tted
with special IREM transformers with adjustable magnetic shunt for continuous output regulation
over the entire operating range.
The new and peculiar design guarantees a low acoustical noise, i.e. less than 55dB(A).
The special design, including an auxiliary
fi lter unit, ensures a low ripple with a negligible starting
energy. Weight 105kg.
Further instructions in Installation guide for Recti
fi er see page 30.
Adjust
current
by
turning
hand wheel.
Current
applied
to the lamp
should be
for.
A:320 mm
B:380 mm
H:770 mm
Electric installation
The main operation panel requires 24V DC connected in series with a 3A slow fuse
to the positive (+) conductor.
• The switch requires 24V DC in addition to grounding.
• Depending on the searchlight model it requires 115V AC or 230V AC.
• Power supplied to the power supply unit must be 3-phase and PE.
• Current supplied to the lamp unit must be speci
fi c, (see Technical data for speci fi c type Omron).
Lamp set-point see page 30.
*To be able to turn o ff the searchlight from the main panel, the switch on top of the power supply
N3-80 must be in position “0” (Zero).
Note: Disconnect the power when working on the equipment!
Electrical equipment must be installed by authorized personnel!
Check the polarity when connecting 24V DC!
All searchlight system equipment MUST BE connected to ground/earth!
*