NORSELIGHT 4036538577789, Инструкция по установке и эксплуатации

Страница: 35 / 39

35
10. Put back the positive connector
Must be pushed in as far as possible, and the
bolt tightened
fi rmly.
11. Put back the lamp holder bracket
12. Put back the front glass on the searchlight,
and you are done.
Note! It is not necessary to loosen the white
lamp holder from the bracket
when doing a normal bulb change. If this have
been loosened or adjusted, it is important that
the light bulb has approximate 1 to 1,5mm of
free running space because it is expanding
when warm.
Check this by pushing the bulb backwards in
the lamp holder using light force,
the spring holder in the back shall give you the
necessary space when installed correctly.
8. Unscrew the lamp using hand force.
9. Replace the lamp, tighten by hand force.