29
Mode
Description
Setting
Requirement
Performance
1:RC 2:RM
Dedicated
Return Line
Accessory
Wait Time
Water Savings
Energy
Savings
Hot Water
Temperature
No Recirculation
- page 29
Same as regular tankless water heaters.
OFF
NA
NO
-
-
-
-
External* [Etnl]
- page 30
Quick hot water with dedicated return line.
ON
Etnl
YES
-
Best
Good
Best
On-Demand* [tt24]
- page 31
Only operates recirculation line with a push
of a button.
ON
tt24
YES
IHK-NRCP
Better
Best
Hot
Crossover* [CrOS]
- page 32
Quick warm water without dedicated return
line.
ON CrOS
NO
cCS-V
Best
Better
Warm
* Recirculation is activated by Timer [Auto / Manual].
Recirculation Modes : External Mode / On-Demand Mode / Crossover Mode
To select a recirculation mode, you must set from the ‘Installer Mode’ on the front control panel.(Refer to the page 34 )
When you use a recirculation mode, there will be some minor efficiency loss, as a result of the water heater maintaining a steady
temperature within the recirculation loop.
With the recirculation operation, hot water will be automatically circulated in the hot water pipes. Even with this function activated,
it may take several minutes for hot water to be completely circulated through the plumbing system. Set the timer to activate the
recirculation system prior to the first use of hot water to ensure hot water is available.
This water heater has a built-in pump and temperature sensor. DO NOT use any external pump or control.(ex. aquastat)
Plumbing Guidelines
Chapter 4. – Installation
4-6. Plumbing Applications
No Recirculation Mode
Select Water Heater Mode
Recirculation timer setting can be changed by customer's own desire time.
Auto (self learning mode) function can be selected by customer's need.
Please refer to page 19 from Owner's Guide for more detailed information for timer setting and auto function.
1. Only POTABLE water may be plumbed through the water heater.
2. The water heater cannot be used for space heating applications.
3. Expansion tank is required if a backflow preventer is installed.
4. Noritz recommends the use of an Isolation valve kit with the installation.
Cold Water Line
Cold Water
Return Cap (Pre-installed - DO NOT REMOVE)
Hot Water Line
Hot Water
Water
Heater