4.1.8 Delete user
Delete all users:
20, 0000#
Delete user card by read card(or fingerprint):
21, read card(or press fingerprint once), …
Delete user by input 8-digit format card number:
21, 8# (8-digit format number) #, 8# (8-digit format number) #, …
Delete user by input 10-digit format card number:
21, 10# (10-digit format number) #, 10# (10-digit format number) #, …
Delete user by input ID number
22, (ID) #, (ID number) #, …
4.1.9 Set open door methods
30, 0#, open door by card.
30, 2#, default value, open door by cards or fingerprint.
30, 3#, open door by fingerprint.
30, 5#, open door by card and fingerprint.
30, 6#, open door by multi-user.
Note: Super-open-card is not affected by any open door method; you can open door at any
time. Open door by multi-user refer to open door by multi-card or multi-fingerprint, if card and
fingerprint are the same ID, as one user.
4.1.10 Set the number of doors opened by multi-user
31, (2-10)#, read 2-10 cards (or fingerprints) in order to open the door (the door opening
mode must be set to the multi-user opening mode)
4.1.11 Set lock working mode
32, 0#, default value, set lock to Delay mode. After an unlock operation, the lock is opened ,
then the lock will be closed automatically after a few moment of delay. Apply to normal open.
32, 1#, set lock to Switch mode. After an unlock operation, the lock will keep opening until
another unlock operation again, the lock will keep locking, and so on.
32, 2#, set lock to Normal-open mode. Under this mode, the lock will keep opening, not
controlled by other unlocking action. If the user don’t want to use the Normal-open mode,
please set the mode to the other two modes.
Note: A better way to implement the Normal-open mode is operation by Normal-open card
Fingerprint Standalone
Access Control User Manual
