4 Basic Functions
4.1
Management menu operations
In all modes, the steps of entering the management menu:
* key (Hold on for more than 2 seconds), (Admin Password)#
or to read Set-card
Note: Admin Password is 6 digits, 888888 is the factory default admin password. User
should change the Admin Password when use the device for first time, otherwise user cannot
continue other operation. If the Admin Password is correct, the indicator light will turn to green
once and then back to red flash status. Other operations must be performed in this status. If the
user who forget the admin password or user who need to use the management menu for many
times can use this method by read the Set-card instead keypad operation.
4.1.1 Change Admin Password
00,(New Admin Password)#,(Repeat Admin Password)#
Note: New Admin Password must be 6 digits.
4.1.2 Set admin card (Fingerprint)
01, 0#, read card(or press fingerprint twice), …, Set 1-3 Set-cards(or fingerprint).
01, 1#, read card(or press fingerprint twice), …, Set 1-3 Add-cards(or fingerprint).
01, 2#, read card(or press fingerprint twice), …, Set 1-3 Delete-cards(or fingerprint).
01, 3#, read card(or press fingerprint twice), …, Set 1-3 Super-open-cards(or fingerprint).
01, 4#, read card(or press fingerprint twice), …, Set 1-3 Anti-duress-cards(or fingerprint).
01, 5#, read card(or press fingerprint twice), …, Set 1-3 Authorization-cards(or fingerprint).
01, 6#, read card(or press fingerprint twice), …, Set 1-3 Normal-open-cards(or fingerprint).
Note: Each type of admin card(or fingerprint) can be divided several times to set till to 3pcs.
4.1.3 Delete admin card(or fingerprint)
02, 0000#, delete all 21 admin cards(or fingerprint).
Fingerprint Standalone
Access Control User Manual
