Nordson Compact Manual Iso-Flo Voltage-Block, Руководство пользователя

Страница: 35 / 76

Installation
3-3
E 1996 Nordson Corporation
All rights reserved
108 390B
Issued 7/96
Manual 10-10
Install the Compact Manual Iso-Flo system between the coating material
kitchen or pump and the spray device. This allows charged coating
material to flow to the spray device, but blocks voltage from grounding at
the kitchen or the pump.
NOTE: Locate the unit inside or near the spray booth, or on a dolly so
the coating material hose connecting the Iso-Flo system and the spray
device is as short as possible.
No electricity or external controls are required for the Iso-Flo system.
Compressed air powers the Iso-Flo and it operates automatically in
response to the spray device trigger. To install, mount the unit and
connect the air, fluid supply, spray device hoses, and electrostatic cable.
Mounting holes are provided in the side flanges. Dimensions, hole
patterns, hose connections, and cable connections are shown in
Figure 3-2.
2. Mounting and
Connections