background image

13

4.  Define the target heart rate zone if desired.

 

 The maximum heart rate 
will flash in the middle left 
display.

 

 

To set the maximum heart rate,

 press the Right 

button repeatedly to select the desired heart rate. 
To select a heart rate quickly, press and hold down 
the Right button.

 

 Next, press the Left 
button. The minimum 
heart rate will flash in the 
middle left display. 

 

 

To set the minimum heart rate,

 press the Right 

button repeatedly to select the desired heart rate. 
To select a heart rate quickly, press and hold down 
the Right button.

 

 Note: You must define a target heart rate zone to 
use the heart rate alarm (see HOW TO USE THE 
HEART RATE ALARM on page 16).

 

 To determine your target heart rate zone, see 
EXERCISE INTENSITY on page 17.

 

 Press the Left button to advance to the next 

 

setting.

5.  Enter your gender if desired.

 

 A gender symbol will 
flash in the lower display.

 

 Press the Right button repeatedly to select the 
symbol that represents your gender.

 

 Press the Left button to advance to the next 
setting.

6.  Select a unit of measurement if desired.

 

  The console can display speed, distance, and 
weight in standard or metric measurements. 

 

 The letters Lb (standard) 
or Kg (metric) will flash in 
the lower display to show 
which unit of measure-
ment is selected.

 

 Press the Right button repeatedly to select the 
desired unit of measurement.

 

 Press the Left button to advance to the next 

 

setting.

7.  Enter your weight if desired.

 

 A weight setting will flash 
in the lower display.

 

 Press the Right button 
repeatedly to select your 
weight. To select your 
weight quickly, press and 
hold down the Right 
button.

 

 Note: You can select a weight setting between 
44 and 396 pounds or between 20 and 180 kilo-
grams. 

The exercise bike should not be used by 

persons weighing more than 300 pounds or 136 
kilograms.

8.  Exit the setup mode at any time.

 

 The console will exit the setup mode automati-
cally if several seconds pass and no buttons are 
pressed.

 

 Note: To advance again through the settings 
described in steps 3 to 7, press the Left button 
repeatedly. 

Содержание Gx5.0 Sport Bike





















Отзывы: