Nordica LNK15 EVO, Руководство пользователя

Страница: 30 / 48

34°C 221 °C 100 %
25°C 20 °C 0 %
ENGLISH
first start-up
The first IgnITIon requires a special approach.
It differs from normal operation, as described below, because the inside of the boiler and the refractory panels are still free of ash residue. all
air intakes inside the combustion chamber (except for the nozzle stone) must be clogged over time to ensure clean and efficient operation.
To do this, proceed as follows:
1. line the upper combustion chamber with cardboard;
aTTenTIon: the nozzle gap must remain clear!
2. fill the combustion chamber up to the level of the fire door with smaller pieces of wood;
3. Place some cardboard or paper in front of the wood to help light it;
4. IgnITIon.
Temp.
WaTer
Temp.
smoke aIr Press the
menu
key
iGnition
manual
confirm
iGnition
with
the menu key
Temp.
WaTer
Temp.
smoke aIr
5. burn the thin cardboard or paper and close the door leaving a gap of less than 1 cm;
6. The door can be closed if the smoke temperature is higher than 220°c;
7. after the wood has burned and formed a layer of embers, more wood can be placed on top of it as tightly as possible;
8. check the operation of the boiler (smoke measurement) and check the buffer filling/return flow increase.
loaDinG Door
iGnition Door
combustion
chamber Door
30 30