manualshive.com logo in svg

Nordica LNK15 EVO, Руководство пользователя

Поделиться
Скачать
Nordica LNK15 EVO Скачать руководство пользователя страница 13

ENGLISH

information on the boiler

The lnk-evo boiler is a wood gasification boiler with built-in differential control for buffer tank loading by means of a sensor.

all operating parameters are preconfigured in the control. only the primary and secondary air positions need to be adapted to the standard 

fuel. This is done when the boiler is commissioned with the help of a flue gas analyser. There is a detailed section on the following pages to 

illustrate the operating mode.

how it is DelivereD

The lnk-evo boiler is delivered completely pre-assembled and complete with covering. It is transported on a pallet. for safety reasons, the 

boiler is secured to the pallet with screws. depending on the installation room and situation, the boiler can be partially disassembled.

The delivery of the boiler includes:

- connection cable ready for connection;

- combustion chamber made of refractory panels;

- cleaning kit;

- Identification plate and energy label (already glued on);

- Turbolators and cleaning mechanism;

- smoke suction fan with exhaust flange (packed separately in a box);

- heat exchanger cleaning lever (disassembled, placed in the upper combustion chamber);

- Instructions for use (placed in the upper combustion chamber);

- heat exchanger cleaning equipment.

accessories requireD

- anti-condensation valve

- safety valve - 2.5 bar

- safety device for thermal discharge

- expansion tank

- draught limiter

- Technical water tank

13

13

Содержание LNK15 EVO

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды