manualshive.com logo in svg

Nordica LNK15 EVO, Руководство пользователя

Поделиться
Скачать
Nordica LNK15 EVO Скачать руководство пользователя страница 19

sensore fumi

ENGLISH

boiler assembly

Disassembly / introDuction / assembly

The product is delivered almost completely pre-assembled. only the lever for cleaning the heat exchanger and the fan unit needs to be 

installed.

Disassembly

depending on the conditions of the room in which the boiler is installed, some parts of it may be disassembled differently for transport 

purposes.

weight reduction

:

- removal of suspended plates;

- removal of ceramic components and refractory panels from the upper and lower combustion chambers;

- disassembly of the covering door;

- disassembly of the three boiler doors;

please note

:

When disassembling components from inside the boiler, the disassembled parts must be marked in order to be able to install them quickly 

and correctly.

hanDlinG

The boilers are screwed onto the transport pallets for safety reasons. loosen these screws and push the boiler off the pallet.

If the boiler needs to be lifted, there is an eyelet welded to the centre of it.

It is advisable to use a pallet truck when moving it at ground level.

any disassembly must be adapted to the conditions of the room as well as the type of installation, so that the boiler is not damaged!

assembly

If the boiler is installed as delivered, only the following precautions must be taken to complete the system:

- assembly and alignment of the adjustable feet;

- assembly of the components of the smoke exhaust system;

- assembly of the lever for cleaning the heat exchanger (description below).

positioning the smoke sensor

The smoke sensor is inserted in the dedicated hole above the flue flange and it is 

locked in place by means of a self-tapping screw. 

(see image to the side)

connectinG the smoKe exhaust system

The connection between the smoke exhaust and the chimney flue must be chosen according to the chimney calculation and the configurations 

that the installation room allows. 

it is necessary to take into account product and installation regulations.

The smoke exhaust system and relative gasket are not pre-assembled.

This unit can be installed at different angles depending on the installation site and the position of the chimney.

The possible variants, vertical and 45° to the right/left, are shown below.

smoke sensor

19

19

Содержание LNK15 EVO

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды