Nordica ETNA 2500, Руководство пользователя

Страница: 20 / 28

18
3 THE CHIMNEY
3.1 RECOMMENDED CHIMNEY
This fireplace is designed and approved to be installed with chimneys of 166 mm (
7’’).
Everest and Etna 2500
Manufacturer Model
Cheminée Sécuritée Int
S-2100+ or ASHT+
Oliver Macleod Ltd or
Selkirk Metalbestos Ltd CF Sentinel or SS Ultra Temp
Superpro ALT or SPR
Supervent (GSW) JSC or JM
ICC Excel2001
Simpson Dura-vent Duraplus HTC or Duratech
Install the fireplace according only to the described methods by respecting open spaces rigorously.
Use only parts and chimneys specified in this handbook. Any exemption from these directions could
cause a dangerous situation and could cancel certification and the warranty.

No other appliance can be added to your fireplace chimney.
Choose the best site for your fireplace by taking the doors and windows in consideration. Plan the
installation of the chimney as well as the external air intake.
For the installation of the chimney, several choices are offered. Refer to drawings on pages 19 and
20 in order to decide which is appropriate for your needs. Take note that the straighter the chimney
is, the easier it will be to clean it and keep it clean.
3.2 TO CONTINUE THE INSTALLATION OF CHIMNEY
For the chimney installation, please refer to the manufacturer installation manual of the selected
chimney.
1)
If possible, install an interior chimney to obtain a better performance. In regions where the
temperatures often reach
–18 C (0 F), the use of an exterior chimney add probabilities of
problems such as insufficient draft, high amount of creosote, low lighting capacity. Exterior
chimneys are also exposed at inferior levels of the house, like in a basement, and using an
exterior chimney is particularly exposed to reversals.
2)
To respect the Everest and Etna 2500 hearts attestations, the apparatus must be installed
with an approved chimney system (See page 18).
3)
The chimney installed to this fireplace cannot be connected to any other appliance.
4)
The minimal height of a vertical chimney is 4.57 m (
15’).
5)
All chimney installation must have at least one support. To avoid noises caused by fireplace
expansion, reduce the
chimney’s weight on the fireplace. Support the weight by one or more
supports directly over the fireplace. The maximal length of chimney that the fireplace can
support is 9’ (2.74 m) for the 2’’ chimney, and 12’ (3.7 m) for the 1’’ chimney.