Nordica ETNA 2500, Руководство пользователя

Страница: 26 / 28

24
3.7 FLASHING
1) Install the flashing by sealing the joint between the flashing and the roof, with a roofing
sealant. For sloping roofs, install the flashing upper part under the upper roof shingles, and
fix the flashing to the roof with roofing nails.
2)
Install the storm collar over the flashing and tighten the screw. Finally, seal the joint between
the ring and the chimney with silicone type sealant.
3)
Install the chimney cap.
3.8 CHIMNEY FIRE
If you suspect the existence of a chimney fire, it is recommended to:

Close the door or doors of the fireplace ;

Alert all your family members;

Call the fire department if help is needed.
-Try to extinguish or control fire with a dry extinguisher, baking soda, sand or ashes. Never use salt
because it is corrosive or water because it could cause a vapour explosion.
-Make sure that the sparks leaving the chimney do not ignite the roof.
-Make sure you have your fireplace and chimney inspected by the fire department before you use
it again.
4 FIREPLACE SCREEN
4.1 INSTALLATION OF A FIREPLACE SCREEN (OPTIONAL)
It is possible to install a removable screen on the Everest and Etna 2500 models, available at your
retailer.