Heatilator I60 Скачать руководство пользователя

Страница: 1 / 52

Heatilator • I60 US-CAN • 4013-202 Rev F • 11/07

Owner’s Manual

Installation and Operation

Models:
I60
Woodburning Fireplace

DO NOT DISCARD THIS MANUAL

CAUTION

• Important

operating

a n d m a i n t e n a n c e
instructions included.

• Leave this manual with

party responsible for
use and operation.

• Read,

understand

and follow these
instructions for safe
i n s t a l l a t i o n a n d
operation.

NOT

DISCARD

Installation and service of this

replace should

be performed by quali

ed personnel. Hearth &

Home Technologies suggests NFI certi

ed or

factory-trained professionals, or technicians
supervised by an NFI certified
professional.

If the information in these instruc-
tions is not followed exactly, a

re may result causing property

damage, personal injury, or death.

• Do not store or use gasoline or other

am-

mable vapors and liquids in the vicinity of

this or any other appliance.

• Do not over

re. Over

ring will void your

warranty.

• Comply with all minimum clearances to

combustibles as speci

ed. Failure to

comply may cause house

re.

WARNING

Fire Risk

• For use with solid wood fuel or decorative

gas appliance only.

• Do not install unvented gas logs.

WARNING

Hot glass will cause burns.

•  Do not touch glass until it is cooled
•  NEVER allow children to touch glass
•  Keep children away
•  CAREFULLY SUPERVISE children in same room

replace.

• Alert children and adults to hazards of high

temperatures.

High temperatures may ignite clothing or other

ammable materials.

• Keep clothing, furniture, draperies and other

ammable materials away.

HOT SURFACES!

Glass and other surfaces are
hot during operation AND
cool down.

Содержание I60





















































Результаты поиска

Содержание I60

Отзывы:

Похожие инструкции для I60

Бренды по названию

Популярные бренды

Heatilator I60, Руководство пользователя

Результаты поиска

Содержание I60

Отзывы:

Похожие инструкции для I60

Бренды по названию

Популярные бренды