Nordco TRIPP HD, Руководство по эксплуатации

Страница: 63 / 82

ROUTINE MAINTENANCE
MAR 2016 49457610 TRIPP HD RevB 7-5
MACHINE MAINTENANCE SCHEDULES
DAILY SCHEDULE
DAILY (OR 10 HOURS, WHICHEVER COMES FIRST)
Key
= Refer to Manufacturer’s Manual in Component Data; = More Detailed Instructions Follow
LOC ITEM SYM TASK
EN
G
IN
E
NOTE
All engine maintenance should follow the instructions given in the Engine Manufacturers Operation
Manual. Items below are for general reference only.
Perform all maintenance BEFORE engine startup
(Daily – AM).
D1 Check engine oil level.
D2 Check coolant level.
D3 Drain Fuel/Water Separator (if equipped).
D4 Clean Dust Unloader Valve (if equipped).
D5 Check Fuel Filter.
D6 Check Engine Air Restrictor Indicator (if equipped). Replace as necessary.
D7 Walk around inspection.
HYDR
AULIC
D8 Check Hydraulic Oil Level and Quality (Sight inspection at Gauge). Fill as required.
D9
Check Hydraulic Oil Filter Indicators at Front Control Panel (requires machine
running and working).
D10 Inspect Hoses and Fittings for Leaks.
D11 - Reserved for Future Use -
D12 - Reserved for Future Use -
RAIL LIF
T
&
ST
A
B
ILIZER
D13 Grease Rail Lift Cylinder Pivots.
D14 Grease Rail Clamp Lever Pivot Pins.
D15 Check Rail Clamp Cylinder LVDT Cable and DIN Cable Connections.
D16 Check Rail Clamp Rollers for Wear.
D17 Grease Stabilizer Rod Ends.
D18 - Reserved for Future Use -
D19 - Reserved for Future Use -
TIE E
X
CHA
NGE
R
D20 Grease Tie Exchanger In/Out Cylinder Pivot Points.
D21 Grease Tie Exchanger Up/Down Cylinder Pivot Points.
D22 Grease Extender Latch Pivot Point.
D23 Grease Gripper Jaw Lever Pivot Points.
D24 Grease Gripper Jaw Tilt Cylinder Pivot Point.
D25 - Reserved for Future Use -
MI
SC.
D26 Fill Fuel Tank – End of Day.
D27 Inspect electrical connections/harnesses for tightness.
D28 Drain Air Tanks.
D29 Grease Brake Lever Pivot and Suspension Arm Pivot
D30 Grease Axle Bearings